How To Unclog A Toilet In 8 Quick And Easy Steps

Have you ever found yourself in the middle of a plumbing emergency, with a clogged toilet and no idea how to fix it? Don’t worry, you’re not alone. Toilet clogs are one of the most common plumbing problems, but luckily they can be fixed pretty easily. In this blog post, we’ll take you through 8 quick and easy steps on how to unclog your toilet fast. From basic preventative measures to more intensive solutions, we have all the tips and tricks you need to get your loo back up and running in no time!

Supplies You’ll Need

There are a few different items that you will need in order to unclog your toilet and get it working properly again. Here is a list of supplies that you will need:

-A plunger: This is the most important tool that you will need in order to unclog your toilet. Be sure to use a plunger that is designed specifically for toilets, as regular plungers will not work as effectively.

-A bucket: You will need this to catch any water that overflows when you are plunging the toilet.

-Plumber’s snake: This is a long, flexible tool that can be used to reach clogs that are located further down in the drain.

-Liquid plumber: This is a chemical solution that can be used to break up tough clogs.

Step One: Don’t Panic

If you’re faced with a clogged toilet, the first thing you need to do is take a deep breath and try not to panic. This is a problem that can be fixed relatively easily with just a few simple steps.

The first thing you’ll need to do is turn off the water to the toilet. There will be a valve somewhere near the base of the toilet – usually on the wall behind it. Once the water is shut off, you can start scooping out any water that’s already in the bowl. This will make it easier to work on the clog itself.

Next, you’ll need to grab a plunger and see if you can dislodge the clog that way. If the plunger doesn’t do the trick, you can try using a plumber’s snake or an auger. These are long, flexible devices that can help push through or break up stubborn clogs.

If none of these methods work, your last resort is to call a professional plumber. They will be able to quickly diagnose the problem and get your toilet back up and running in no time!

Step Two: Remove the Toilet Bowl Lid

Be sure to protect your hands with gloves while you remove the toilet bowl lid. You will need to use a screwdriver to unscrew the bolts that hold the lid in place. Once the screws are removed, lift the lid off of the bowl. If the lid is too heavy or difficult to remove, you may need to ask for help from another person.

Step Three: Flush the Toilet

If you have a plunger, the next step is to use it to try and dislodge the clog. Place the plunger over the hole in the toilet bowl and push and pull the plunger up and down vigorously. If you don’t have a plunger, you can try using a wire hanger. Straighten out the wire hanger and then place it over the hole in the toilet bowl. Push and pull the wire hanger up and down vigorously. If neither of these methods work, you can try flushing the toilet several times in quick succession. This may be enough to dislodge the clog so that it will flush away.

Step Four: Use a Plunger

If the toilet is still clogged after using a toilet brush, it’s time to use a plunger. Be sure to use a plunger that is the right size for the toilet bowl. Put the plunger over the hole in the bottom of the toilet bowl and plunge up and down. The suction from the plunger will help to break up the clog. Continue plunging until the water starts to drain from the toilet bowl.

Step Five: Use a Wire Hanger

If the plunger isn’t doing the trick, then it’s time to break out the wire hanger. This is a pretty common household item, so you likely have one on hand. If not, they’re very cheap and easy to find at any hardware store.

Start by straightening out the wire hanger as much as possible. Then, create a small hook at one end of the wire. This will be used to fish out any debris that might be clogging up your toilet.

Carefully insert the wire into the toilet bowl and start fishing around. Be careful not to scratch the bowl with the wire. If you feel something, try to hook it and pull it out.

Once you’ve removed as much debris as possible, flush the toilet again to see if that did the trick. If not, you may need to repeat this process a few times until the clog is finally cleared.

Step Six: Use Vinegar and Baking Soda

If you find that your plunger isn’t doing the trick, you can try using a mixture of vinegar and baking soda. Just pour 1/2 cup of baking soda into the toilet bowl, followed by 1/2 cup of vinegar. Let the mixture sit for a few minutes before flushing the toilet. This should help to break up any clogs that are causing problems.

Step Seven: Use Boiling Water

Once the plunger is removed, it’s time to bring out the big guns: boiling water. Boiling water is an effective way to unclog a toilet because it melts any grease or soap that may be causing the blockage.

Pour a pot of boiling water into the toilet bowl, and let it sit for a few minutes. Then, flush the toilet to see if the boiling water was effective in clearing the clog. If not, repeat the process until the clog is gone.

Step Eight: Call a Plumber

If your plunger does not work, it may be time to call a professional. Plumbers have the tools and expertise to unclog toilets quickly and efficiently. In most cases, a plumber will be able to clear the blockage without having to disassemble the toilet.


Unclogging a toilet can be frustrating and time-consuming, but the good news is that it doesn’t have to be. With these 8 quick and easy steps, you can unclog your toilet in no time! Remember to wear protective gear when necessary and use a plunger or an auger for best results. Don’t let clogged toilets get you down – follow these simple steps instead and save yourself some hassle next time you need to get things flowing again!

OLR | CGA | DOL | Blog

Copyright © 2024

Privacy policy